FeiEgg Device Connection Code Reference
Start Here: How to Choose
FeiEgg device connection codes vary along two dimensions:
- How many motors — 1 or 2
- Whether it has heating — with heating or without
Then you pick the communication method. The difference between the two:
| Communication | Characteristics | Best for |
|---|---|---|
| BLE | Stable connection at close range | Everyday use, where stability comes first |
| Broadcast | No pairing needed · connects on power-up | Getting started fast, skipping the pairing step |
来源：飞蛋官方教学视频第一集
Full Reference Table
BLE (stable connection at close range)
| Device code | Motors | Heating |
|---|---|---|
| 1015 | 1 | No |
| 1013 | 1 | Yes |
| 2011 | 2 | No |
| 2113 | 2 | Yes |
Broadcast (no pairing needed · connects on power-up)
| Device code | Motors | Heating |
|---|---|---|
| 5295 | 1 | No |
| 5294 | 1 | Yes |
| 5293 | 2 | No |
| 5292 | 2 | Yes |
Why there are 8 different codes
A different code means a different hardware configuration. Use the wrong code and you get "it connected but won't do what I want" — for example, a dual-motor device driven by a single-motor code will only move one motor; a device with heating driven by a non-heating code won't start its heating.
If you're not sure which configuration your device is, use the app's scan feature to scan the QR code on the device — it's more reliable than typing the code by hand.
How to Enter It
Option 1: Install the app first, then connect (recommended)
- Open the FeiEgg app
- Go to the Device Connection page
- In the input field, enter the code from the table above that matches your device
- Tap Confirm Connection
Option 2: Scan the QR code (less hassle)
On the Device Connection page, tap the scan icon to the right of the input field and scan the QR code on the device or in the manual. It detects the configuration automatically, so you don't have to work out the motor count yourself.
This is the least error-prone method. Typing the code by hand means you have to confirm the motor count and heating yourself; scanning lets the system read it directly.
来源：飞蛋官方教学视频第一集
What You Can Do After Connecting
Once connected, go back to the Play page, where three modes are available: 来源：飞蛋官方教学视频第一集
| Mode | Description |
|---|---|
| Classic mode | Pulse · Ramp-up · Vibration |
| Touch creation (DRAW WAVE) | Draw waveforms by hand, customize the rhythm |
| Voice control mode (VOICE) | Syncs to the rhythm of sound |
The app has five main tabs at the bottom: Control / Sync / Discover / Waveform Library / Me.
Troubleshooting a Failed Connection
Work through these in order — most problems are solved by the first three steps:
- Make sure you picked the right device code — check the motor count and heating configuration; don't go by memory
- Make sure the device is powered on and in a connectable state — some devices need a long press to power on
- Make sure Bluetooth permission is granted — on first launch the app requests
"find and connect to nearby devices" permission, and you must tap Allow
- Switch to scanning the QR code — this skips the human judgment about configuration
- Try the other communication method — switch BLE to broadcast, or vice versa
- Power the device off and back on, then retry
- If it still fails, see the Bluetooth section of the FAQ
Android battery-saving policies are the number-one cause of dropped connections. If the connection repeatedly drops when you switch to another app, go into system settings and add FeiEgg to the "unrestricted" or "allow background activity" allowlist. See Bluetooth FAQ for details.
Reading the Device Identifier
The connection confirmation page shows device information, for example:
`` Air 2+1 PH_HXW_001 [广播连接] ``
| Item | Meaning |
|---|---|
Air 2+1 | Model and configuration (2 motors + 1 additional feature) |
PH_HXW_001 | Device identifier code, used to tell devices apart |
[广播连接] | The communication method currently in use |
来源：飞蛋官方教学视频第一集
The maximum number of devices that can be connected at once is not publicly disclosed. 未公开/待核实 If you need to run multiple devices at the same time, we recommend asking support directly before you order.